Tell us about your harness!

Get a labor quote instantly, and a turnkey quote within 1 business day.

Solder Cup Contact
Enter the number of solder cup-style contacts in each harness. 		0 - 500
Crimp Contact (machined)
Enter the number of machined, crimp-style contacts (such as the M39029 contacts commonly found in D38999 and 26482 connectors) in each harness. 		0 - 500
Crimp Contact (stamped)
Enter the number of stamped, crimp-style contacts (often referred to as automotive contacts) in each harness. 		0 - 500
Shield Termination (solder sleeve)
Enter the number of solder-sleeve-style shield terminations (such as Raychem (r)) on each harness. 		0 - 100
Shield Term (pick-and-pull/window)
Enter the number of pick-and-pulled shield terminations on each harness. 		0 - 100
Unterminated Shield
Enter the number of unterminated (trimmed flush and insulated, or similar) shields in each harness. 		0 - 100
Tie-Up (ft)
Enter the length of harness, to the nearest foot, to be tied up per AC43.13-1b Ch. 11 or similar. 		0 - 100
Metallic Overbraid (ft)
Enter the length of harness, to the nearest foot, to be shielded with metallic overbraid. 		0 - 100
Environmental Sheathing (ft)
Enter the length of harness, to the nearest foot, to be sheathed with environmental sheathing such as DR-25 (r) or similar. 		0 - 100
Splice (soldered lap)
Enter the number of soldered lap splices in each harness. 		0 - 100
Splice (crimped)
Enter the number of crimped splices in each harness. 		0 - 100
Potted Connectors
Enter the number of connectors to be potted with epoxy or similar sealant. 		0 - 20
Shrink Boot (backshell)
Enter the number of environmental shrink boot backshells, such as Raychem (r) boots, on each harness. 		0 - 20
Shrink Boot (breakout)
Enter the number of multi-way breakout heat shrink boots on each harness. 		0 - 20